Japanese swords were traditionally made from a steel called tamahagane. Its raw material is iron sand, and its fuel is charcoal. It is made in a clay furnace kept burning for about three days. How did black sand become the steel of a sword? Here is the story of tatara ironmaking.
What tatara means
Iron tools came into use in Japan in the Yayoi period, but no trace of ironmaking in Japan from that time has been found. Domestic ironmaking is thought to have begun in the late 6th century, in places such as western Fukuoka and the mountains along the upper Yoshii River in Okayama.
Poems and tales of the Heian period mention casters "treading the tatara." A tatara was a foot-operated bellows that blew air into a furnace. In time, the word came to mean the furnace with its bellows, and even the building that housed it.
Sand and charcoal, three days and nights
A tatara furnace is a low, rectangular box built of clay. Air is blown in from below to burn the charcoal, while iron sand and charcoal are added from above in turn. One run, called a hitoyo, lasts from three to four days and nights. By then the clay walls have worn away inside, and the furnace can no longer be used.
One run used roughly 13 tonnes of iron sand and 15 tonnes of charcoal to produce about 3.5 tonnes of iron. The work was led by a master called the murage, with charcoal workers and bancho, the men who pumped the bellows, under him. Controlling the air and reading the color of the fire were what mattered most.
Pig iron and kera
There were two ways to run a tatara. One used a sand called akame to make zuku, a high-carbon pig iron that melts easily and was used for casting. The other used a sand called masa to make kera, a steel-like bloom. The kera method is said to have begun in the 14th century.
In the early 17th century, furnaces moved inside large buildings called takadono, and at the end of the century a seesaw bellows, the tenbin-fuigo, appeared. Iron sand was gathered by breaking up weathered rock on the hillsides and washing it through a chain of ponds, so that only the heavy sand settled. This work, kanna-nagashi, was a winter side job for farmers.
Around the takadono grew a settlement called a sannai, with an office, a rice store, workers' longhouses and a shrine to Kanayako, the god of iron. The sannai was run by an ironmaster.
Tamahagane, the chosen steel
Tamahagane is the best steel picked out from the kera. It contains about 0.9 to 1.8 percent carbon and very little phosphorus, sulfur or other impurities. It was used for the edges of swords and other blades.
The name is said to come from the Meiji era, when steel of this kind was supplied to a navy arsenal under that name. The steel was graded by the size of its pieces, from korohagane, lumps about 15 cm across, down to jami, bits under 3 cm.
A fire that went out
Tatara flourished in the Chugoku Mountains of western Japan from the early modern period into the Taisho era. In 1890 there were 230 furnaces there, making 17,000 tonnes of iron a year. From the Meiji era on, modern ironmaking with large blast furnaces pushed it aside, and after the Second World War it was hardly practiced at all. Only about five or six tonnes of tamahagane are said to have been left after the war.
In 1977, the Society for the Preservation of Japanese Art Swords relit a tatara fire in Okuizumo, Shimane, after a gap of about 30 years. Men who had once worked the old furnaces were found and served as murage, passing on their skills. The Nittoho Tatara still runs from time to time, both to keep the craft alive and to supply tamahagane to swordsmiths.
Caring for a steel blade
In the port town that once shipped tatara steel, a company was founded to keep that craft alive, and it led to today's Shirogami steel. Shirogami itself, though, is made by modern steelmaking, not in a tatara. For more, see What Is Shirogami?
Wipe a steel blade dry after use, and sharpen it when it dulls. For the stones used to sharpen it, see Japanese Whetstones.